Dimensions:
370 x 300 x 210 cm
Material:
- Flysheet: Polyester 185T PU 3000mm
- Poles: Fiberglass Ø12,7mm and steel Ø16mm
- Groundsheet: PE
Specification:
- Freestanding motorhome tent for vehicles with sliding door
- Mounting height: 180 - 220cm
- Connector depth: 40cm
- Connector length: 230cm
- Connector with pre-atached beading/kador
- Fitting groundsheet
- Large windows on both sides with half mesh and half window film
- Large panoramic windows on the front side
- Side windows can be covered from the outside
- Front windows can be covered from the inside
- Large air vent in the front panel
- Amount of air vents: 3
- The front panel can be put up as canopy with the included upright poles
- The rear panel can be roled up sideways
- Side-entrance on the right side that can be rolled up
- Hanging hook for a lamp on the inside
- Two steel roof poles on the inside to improve stability
- Weight: 14,4kg
- Pack size: 70 xØ 23cm
- Comes with pegs, guy ropes, two steel upright poles, rain-gutter pole and a carry bag
Remarks:
Pitching time: Approx 30 minutes
Optional 2-berth innertent available
There are various possibilities to connect the awning on a vehicle
1: Pull the connector over the roof with guy ropes
2. Attach the connector to a mounting rail with the kador/beading
3. Clamp the connector in a rain gutter with the supplied pole and clamps
4. Attach the connector to the roof with optional suction cups
5. Attach the connector on to a metal roof with anoptional magnetic band connector
6. Attach the connector to a Fiamma or Thule awning with an optional kador/beading adapter kit
